Show Running-Config - NETGEAR M6100 Series Reference Manual

Parameter Description
VM Peak The maximum amount of virtual memory the process has used at a given time.
FD Count The file descriptors count for the process.
Command example:
(NETGEAR Switch) #show process proc-list
Process
PID Name
---- ---------------- -------------------- ---- -------- -------- --------
15260 procmgr
15309 dataplane
15310 switchdrvr
15314 syncdb
18718 lighttpd
18720 lua_magnet
18721 lua_magnet

show running-config

Use this command to display or capture the current setting of different protocol packages
supported on the switch. This command displays or captures commands with settings and
configurations that differ from the default value. To display or capture the commands with
settings and configurations that are equal to the default value, include the all option.
Note: The show running-config command does not display the User
Password, even if you set one different from the default.
The output is displayed in script format, which can be used to configure another switch with
the same configuration. If the optional scriptname is provided with a file name extension of
.scr, the output is redirected to a script file.
Note: If you issue the show running-config command from a serial
connection, access to the switch through remote connections (such
as Telnet) is suspended while the output is being generated and
displayed.
M6100 Series Switches
Application
ID-Name
0-procmgr
1-dataplane
2-switchdrvr
3-syncdb
4-lighttpd
4-lighttpd
4-lighttpd
Utility Commands
171
VM Size VM Peak
Chld (KB) (KB)
No 1984 1984
No 293556 293560
No 177220 177408
No 2060 2080
No 5508 5644
Yes 12112 12112
Yes 25704 25708
FD Count
8
11
57
8
11
7
7