Authorization Exec; Authorization Commands - NETGEAR M6100 Series Reference Manual

(NETGEAR Switch) #
(NETGEAR Switch) #configure
(NETGEAR Switch) (Config)#aaa authorization exec default
(NETGEAR Switch) (Config)#aaa authorization commands default tacacs+ none
no aaa authorization
This command deletes the authorization method list.
Format
no aaa authorization {commands | exec} {default | list-name}
Mode Global Config

authorization commands

This command applies a command authorization method list to an access method (console,
telnet, ssh). For usage scenarios on per command authorization, see the command
authorization on page 80.
Format
authorization commands [default | list-name]
Mode Line console, Line telnet, Line SSH
Parameter Description
commands This causes command authorization for each command execution attempt.
no authorization commands
This command removes command authorization from a line config mode.
Format
no authorization {commands | exec}
Mode Line console, Line telnet, Line SSH
Command example:
(NETGEAR Switch) (Config)#line console
(NETGEAR Switch) (Config-line)#authorization commands list2
(NETGEAR Switch) (Config-line)#
(NETGEAR Switch) (Config-line)#exit

authorization exec

This command applies a command authorization method list to an access method so that the
user may not be required to use the enable command to enter Privileged EXEC mode. For
usage scenarios on exec authorization, see the command
M6100 Series Switches
Management Commands
82
tacacs+ none
aaa authorization on page 80.
aaa