User Account Commands; Aaa Authentication Login; Show Loginsession Long - NETGEAR M6100 Series Reference Manual

Term Definition
ID Login Session ID.
User Name The name the user entered to log on to the system.
Connection From IP address of the remote client machine or EIA-232 for the serial port connection.
Idle Time Time this session has been idle.
Session Time Total time this session has been connected.
Session Type Shows the type of session, which can be HTTP, HTTPS, telnet, serial, or SSH.

show loginsession long

This command displays the complete user names of the users currently logged in to the
switch.
Format
show loginsession long
Mode Privileged EXEC
Command example:
(NETGEAR Switch) #show loginsession long
User Name
------------
admin
test1111test1111test1111test1111test1111test1111test1111test1111

User Account Commands

This section describes the commands you use to add, manage, and delete system users.
NETGEAR Managed Switch software has two default users: admin and guest. The admin
user can view and configure system settings, and the guest user can view settings.
Note: You cannot delete the admin user. There is only one user allowed with
read/write privileges. You can configure up to five read-only users on
the system.

aaa authentication login

Use this command to set authentication at login. The default and optional list names created
with the command are used with the aaa authentication login command. Create a list
by entering the aaa authentication login list-name method command, where
list-name is any character string used to name this list. The method argument identifies
the list of methods that the authentication algorithm tries, in the given sequence.
M6100 Series Switches
Management Commands
77