Show Interface Ethernet Switchport - NETGEAR M6100 Series Reference Manual

Term
Packets Transmitted
without Errors
Broadcast Packets
Transmitted
Transmit Packet Errors
Number of Port Link Down
Events
Link Flaps
Time Since Counters Last
Cleared
If you use the all keyword, the following information displays for all interfaces on the switch.
Term
Port
Bytes Tx
Bytes Rx
Packets Tx
Packets Rx

show interface ethernet switchport

This command displays the private VLAN mapping information for the switch interfaces.
Format
show interface ethernet interface-id switchport
Mode Privileged EXEC
Parameter Description
interface-id The unit/slot/port of the switch.
The command displays the following information.
Term
Private-vlan
host-association
Private-vlan mapping
M6100 Series Switches
Definition
The total number of packets transmitted out of the interface.
The total number of packets that higher-level protocols requested be transmitted to the
Broadcast address, including those that were discarded or not sent.
The number of outbound packets that could not be transmitted because of errors.
The number of occurrences that a port link went down.
The number of link flaps per interface.
The elapsed time, in days, hours, minutes, and seconds, since the statistics for this switch
were last cleared.
Definition
The Interface ID.
The total number of bytes transmitted by the interface.
The total number of bytes transmitted by the interface.
The total number of packets transmitted by the interface.
The total number of packets transmitted by the interface.
Definition
The VLAN association for the private-VLAN host ports.
The VLAN mapping for the private-VLAN promiscuous ports.
Utility Commands
162