Show Mac-Addr-Table - NETGEAR M6100 Series Reference Manual

Hide thumbs Also See for M6100 Series:

Table of Contents

Command example:

(NETGEAR Switch) #show fiber-ports optical-transceiver-info all

-------- ---------------- --- ---- ---------------- ---------------- ----- ----

show mac-addr-table

This command displays the forwarding database entries. These entries are used by the

transparent bridging function to determine how to forward a received frame.

Enter all or no parameter to display the entire table. Enter a MAC Address and VLAN ID to

display the table entry for the requested MAC address on the specified VLAN. Enter the

count parameter to view summary information about the forwarding database table. Use

the interface unit/slot/port parameter to view MAC addresses on a specific

Instead of unit/slot/port, lag lag-intf-num can be used as an alternate way to

specify the LAG interface, in whichlag-intf-num is the LAG port number. Use the vlan

vlan-id parameter to display information about MAC addresses on a specified VLAN.

show mac-addr-table [macaddr vlan-id | all | count | interface unit/slot/port

| vlan vlan-id]

Privileged EXEC

M6100 Series Switches

The vendor part number (vendor PN) is a 16-byte field that contains ASCII

characters, left aligned and added on the right with ASCII spaces (20h), defining the

vendor part number or product name. A value of all zero in the 16-byte field indicates

that the vendor PN is unspecified.

The nominal bit (signaling) rate (BR, nominal) is specified in units of 100 MBd,

rounded off to the nearest 100 MBd. The bit rate includes those bits necessary to

encode and delimit the signal as well as those bits carrying data information. A value

of 0 indicates that the bit rate is not specified and must be determined from the

transceiver technology. The actual information transfer rate will depend on the

encoding of the data, as defined by the encoding value.

The vendor revision number (vendor rev) contains ASCII characters, left aligned and

padded on the right with ASCII spaces (20h), defining the vendor's product revision

number. A value of all zero in this field indicates that the vendor revision is

unspecified.

Length Length

Serial Number

Utility Commands

Table of Contents