Configure Igmp Snooping Delete Static Router - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

configure igmp snooping delete static router

configure igmp snooping vlan <vlan name> ports <portlist> delete static
router
Description
Removes the configuration that causes VLAN ports to forward the traffic from all multicast groups,
even if no IGMP joins have been received on the port.
Syntax Description
vlan name
portlist
Default
None.
Usage Guidelines
Use this command to remove the static IGMP entry created with the following command:
configure igmp snooping vlan <vlan name> ports <portlist> add static router
Example
The following command removes the static IGMP entry that caused all multicast groups to be
forwarded to VLAN marketing on ports 2:1-2:4:
configure igmp snooping vlan marketing ports 2:1-2:4 delete static router
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
2022
Specifies a VLAN name.
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
ExtremeWare 7.7 Command Reference Guide