Configure Bgp Neighbor Source-Interface - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

BGP Commands

configure bgp neighbor source-interface

configure bgp neighbor [<remoteaddr> | all] source-interface [any |

ipaddress <ipAddr>]

Changes the BGP source interface for TCP connections.

Syntax Description

Usage Guidelines

The source interface IP address must be a valid IP address of any VLAN configured on the switch.

The following command changes the BGP source interface to 10.43.55.10:

configure bgp neighbor 192.168.1.5 source-interface ipaddress 10.43.55.10

This command was first available in ExtremeWare XOS 10.1.

This command required an Advanced Core license in ExtremeWare XOS 11.1.

Platform Availability

This command is available on platforms with a Core or an Advanced Core license.

Specifies an IP address of the BGP neighbor.

Specifies all neighbors.

Specifies any source interface.

Specifies the IP address of a source interface.

ExtremeWare XOS 11.5 Command Reference Guide

Extremeware xos 11.5