Configure Bgp Neighbor Source-Interface - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands—"i" Series Switches Only

configure bgp neighbor source-interface

configure bgp neighbor [<ip address> | all] source-interface [any | vlan
<vlan name>]
Description
Changes the BGP source interface for TCP connections.
Syntax Description
ip address
all
any
vlan name
Default
Any.
Usage Guidelines
None.
Example
The following command changes the BGP source interface on the VLAN accounting:
configure bgp neighbor 192.168.1.5 source-interface vlan accounting
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on "i" series of switches.
1876
Specifies an IP address.
Specifies all neighbors.
Specifies any source interface.
Specifies a VLAN name as a source interface for TCP.
ExtremeWare 7.5 Command Reference Guide