Configure Ospf Spf-Hold-Time - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

IGP Commands

configure ospf spf-hold-time

configure ospf spf-hold-time <seconds>

Configures the minimum number of seconds between Shortest Path First (SPF) recalculations.

Syntax Description

Specifies a time in seconds.

Usage Guidelines

The following command configures the minimum number of seconds between Shortest Path First (SPF)

recalculations:

configure ospf spf-hold-time 6

This command was first available in ExtremeWare 4.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0