Configure Ospf Spf-Hold-Time - Extreme Networks ExtremeWare XOS Command Reference Manual
Software version 11.5
Hide thumbs
Also See for ExtremeWare XOS:
- Command reference manual (1712 pages) ,
- Manual (698 pages) ,
- Command reference manual (970 pages)
Table of Contents
Advertisement
ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
configure ospf spf-hold-time
configure ospf spf-hold-time
configure ospf spf-hold-time <seconds>
Description
Configures the minimum number of seconds between Shortest Path First (SPF) recalculations.
Syntax Description
seconds
Specifies a time in seconds. The range is 0 to 300 seconds.
Default
3 seconds.
Usage Guidelines
None.
Example
The following command configures the minimum number of seconds between Shortest Path First (SPF)
recalculations:
configure ospf spf-hold-time 6
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1569
ExtremeWare XOS 11.5 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare XOS and is the answer not in the manual?
Questions and answers