Configure Ospf Area Delete Range - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
IGP Commands
configure ospf area delete range
configure ospf area <area identifier> delete range <ipaddress> <mask>
Description
Deletes a range of aggregated IP addresses in an OSPF area.
Syntax Description
area identifier
ipaddress
mask
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes an aggregated IP address range:
configure ospf area 1.2.3.4 delete range 10.1.2.0/24
History
This command was available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1806
Specifies an OSPF area.
Specifies an IP address.
Specifies a subnet mask.
ExtremeWare 7.7 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?