Configure Ospf Area Delete Range - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

configure ospf area delete range

configure ospf area <area identifier> delete range <ipaddress> <mask>
Description
Deletes a range of aggregated IP addresses in an OSPF area.
Syntax Description
area identifier
ipaddress
mask
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes an aggregated IP address range:
configure ospf area 1.2.3.4 delete range 10.1.2.0/24
History
This command was available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1736
Specifies an OSPF area.
Specifies an IP address.
Specifies a subnet mask.
ExtremeWare 7.5 Command Reference Guide