Setting Ip Address - Extreme Networks Ridgeline Installation Manual

Setting IP Address

The Ridgeline server provides several options for IP communications with Ridgeline clients and
network devices, as shown in
Figure 20: Setting IP Address
1 Choose the desired IP Address option:
Use this IP address to launch the clients and to talk to the network devices.
●
Open the drop down menu to choose an IP address. The drop down menu shows the IP address
for each interface on the host. With this choice Ridgeline uses a single interface to communicate
with both Network clients and network devices.
Use this host name to launch the clients.
●
The server host name is displayed. When you choose this selection, Ridgeline clients
communicate with the Ridgeline server using the hostname, and Ridgeline determines the
interface to use when talking to network devices
Use this host name to launch the clients and this IP address when talking to network devices.
●
The server host name is displayed, along with a drop down menu to choose an IP address. This
option is only present on hosts with multiple network interfaces.
2 Set the HTTP port that clients should use when connecting to Ridgeline. The Ridgeline default HTTP
port is 8080.
3 Choose Next to continue.
Ridgeline Installation and Upgrade Guide
Figure 20.
Installing the Ridgeline Server
29