IP Unicast Commands
enable iparp checking
enable iparp checking
Description
Enables checking if the ARP Request source IP address is within the range of the local interface or
VLAN domain.
Syntax Description
This command has no arguments or variables.
Default
Enabled
Usage Guidelines
None
Example
The following command enables IP ARP checking:
enable iparp checking
History
This command was first available in ExtremeWare 6.2.
This command was added to the "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
1672
ExtremeWare 7.5 Command Reference Guide