ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
configure iproute add
configure iproute add [<ipNetmask> | <ip_addr> <mask>] <gateway> <metric>
{vr <vrname>} {multicast-only | unicast-only}
Description
Adds a static route to the routing table.
Syntax Description
ipNetmask
ip_address
mask
gateway
metric
vrname
multicast-only
unicast-only
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
Use a value of 255.255.255.255 for mask to indicate a host entry.
Example
The following command adds a static address to the routing table:
configure iproute add 10.1.1.0/24 123.45.67.1 5
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies an IP address/mask length.
Specifies an IP address.
Specifies a subnet mask.
Specifies a VLAN gateway.
Specifies a cost metric.
Specifies the virtual router to which the route is added.
Specifies only multicast traffic for the route.
Specifies only unicast traffic for the route.
configure iproute add
1339