Configure Iproute Add - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

configure iproute add

configure iproute add <ip address> <mask> <gateway> <metric>
Description
Adds a static address to the routing table.
Syntax Description
ip address Specifies an IP address.
mask Specifies a subnet mask.
gateway Specifies a VLAN gateway.
metric Specifies a cost metric.
Default
N/A
Usage Guidelines
Use a value of 255.255.255.255 for mask to indicate a host entry.
Example
The following command adds a static address to the routing table:
configure iproute add 10.1.1.1/24 123.45.67.1 5
History
This command was available in ExtremeWare 2.0.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1606 ExtremeWare 7.5 Command Reference Guide