Enable Vrrp Vrid - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

enable vrrp vrid

enable vrrp {vlan <vlan_name> vrid <vridval>}
Description
Enables a specific VRRP virtual router or all VRRP virtual routers on the switch.
Syntax Description
vlan_name
vridval
Default
N/A.
Usage Guidelines
This enables a specific virtual router on the device. If you do not specify a VRRP virtual router, all
VRRP virtual routers on this device are enabled.
Example
The following command enables all VRRP virtual routers on the switch:
enable vrrp
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies the name of a VRRP VLAN.
Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of 1-
255.
enable vrrp vrid
1315