Configure Vrrp Vlan Vrid Authentication - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
VRRP Commands

configure vrrp vlan vrid authentication

configure vrrp vlan <vlan_name> vrid <vridval> authentication [none |
simplepassword <password>]
Description
Configures the authentication type for a specific VRRP virtual router.
Syntax Description
vlan_name
vridval
password
Default
Authentication is set to none.
Usage Guidelines
This command can add a modest amount of security to VRRP advertisements. All VRRP routers using
the same VRID must use the same password when using this feature.
A simple password must be between 1 and 8 characters long.
Example
The following command configures authentication for VRRP VLAN vrrp-1 with the password
configure vrrp vlan vrrp-1 vrid 1 authentication simple-password newvrrp
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1304
Specifies the name of a VRRP VLAN.
Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of 1-
255.
Specifies the user-defined password for authentication.
ExtremeWare XOS 11.5 Command Reference Guide
:
newvrrp