ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
delete stpd
delete stpd
delete stpd <stpd_name>
Description
Removes a user-defined STPD from the switch.
Syntax Description
stpd_name
Specifies a user-defined STPD name on the switch.
Default
N/A.
Usage Guidelines
If your STPD has the same name as another component, for example a VLAN, Extreme Networks
recommends that you specify the identifying keyword as well as the name. If you do not specify the
keyword, an error message similar to the following is displayed:
stpd
%% Ambiguous command:
"delete Test"
In this example, to delete the STPD Test, enter
.
delete stpd Test
If you created an STPD with a name unique only to that STPD, the keyword
is optional.
stpd
The default STPD, s0, cannot be deleted.
In an MSTP environment, you cannot delete or disable a CIST if any of the MSTIs are active in the
system.
Example
The following command deletes an STPD named purple_st:
delete stpd purple_st
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1209
ExtremeWare XOS 11.5 Command Reference Guide