Configure Radius-Accounting Timeout - Extreme Networks ExtremeWare Command Reference Manual

configure radius-accounting timeout

configure radius-accounting {[primary | secondary] {server <ipaddress> |
<hostname>}} timeout <seconds>
Description
Configures the timeout interval for RADIUS-Accounting authentication requests.
Syntax Description
primary
secondary
ipaddress
hostname
seconds
Default
The default is 3 seconds.
Usage Guidelines
This command configures the timeout interval for RADIUS accounting authentication requests. When
the timeout expires, another authentication attempt is made. After three failed attempts to authenticate,
the alternate server is used. After five failed attempts, local user authentication is used.
Examples
This example configures the timeout interval for RADIUS accounting authentication to 10 seconds. After
30 seconds (three attempts), the alternate RADIUS server is used:
configure radius-accounting timeout 10
This example configures the timeout interval for RADIUS accounting authentication to 10 seconds on
the primary server. After 30 seconds (three attempts), the alternate RADIUS server is used:
configure radius-accounting primary timeout 10
This example configures the timeout interval for RADIUS accounting authentication to 10 seconds for
the secondary server. After 30 seconds (three attempts), the alternate RADIUS server is used:
configure radius-accounting secondary server 192.168.4.12 timeout 10
History
This command was first available in ExtremeWare 7.0.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Configures the timeout for the primary RADIUS accounting server.
Configures the timeout for the secondary RADIUS accounting server.
Specifies the IP address of the server being configured.
Specifies the host name of the server being configured.
Specifies the number of seconds to wait before retrying accounting requests. Range is 3 to 120
seconds
configure radius-accounting timeout
877