Show Log Configuration Target - Extreme Networks ExtremeWare Command Reference Manual

show log configuration target

show log configuration target {console-display | memory-buffer | nvram |
session | syslog <host name/ip> {: <udp-port>}[local0 ... local7]}
Description
Displays the log configuration for the specified target.
Syntax Description
console-display
memory-buffer
nvram
session
syslog
host name/ip
udp-port
local0 ... local7
Default
If no options are specified, the command displays the configuration for the current session and console
display.
Usage Guidelines
This command displays the log configuration for the specified target. The associated filter, severity,
match expression, and format is displayed.
Example
The following command displays the log configuration:
show log configuration target
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Show the log configuration for the console display.
Show the log configuration for volatile memory.
Show the log configuration for NVRAM.
Show the log configuration for the current session (including console display).
Show the configuration for the specified syslog target.
Specifies the syslog host name or IP address.
Specifies the UDP port number for the syslog target.
Specifies the local syslog facility.
show log configuration target
785