Config Route-Map Add Match - Extreme Networks ExtremeWare Command Reference Manual

config route-map add match

config route-map <route-map> <seq_number> add match [nlri-list
<nlri_access_profile> | as-path [access-profile <as_access_profile> |
<as_number>] | community [access-profile <com_access_profile> |
<as_number>:<number> | number <community> | no-advertise | no-export |
no-export-subconfed] | next-hop <ip address> | med <number> | tag <number>
| origin [igp | egp | incomplete]]
Description
Configures a route map
Syntax Description
route-map
seq-number
nlri_access_profile
as_access_profile
as-number
com_access_profile
as_number:number
community
no-export
no-advertise
no-export-subconfed
ipaddress
med_number
origin [igp | egp | incomplete]
tag_number
Default
N/A.
ExtremeWare Software 7.0.0 Command Reference Guide
statement.
match
The name of the route map to which this statement should be added.
Specifies the sequence number of the entry in the route map to which this
statement should be added.
Specifies an access profile against which the NLRI should be matched.
Specifies an access profile against which the AS path in the path attributes
should be matched.
Specifies an AS number against which the AS path in the path attributes
should be matched.
Specifies a BGP community access profile against which the community
attribute should be matched.
Specifies a BGP community number, specified in as_number:number format,
against which the community attribute should be matched.
Specifies a BGP community number, specified as an unsigned 32-bit integer
in decimal format, against which the community attribute should be matched.
Specifies that the community attribute should be matched against the
no-export attribute.
Specifies that the community attribute should be matched against the
no-advertise attribute.
Specifies that the community attribute should be matched against the
no-export-subconfed attribute.
Specifies an IP address against which the next hop attribute in the path
attribute should be matched.
Specifies a MED number against which the MED in the path attribute should
be matched.
Specifies an origin against which the origin in the path attribute should be
matched. Values are igp, egp, or incomplete.
Specifies a tag value against which the tag associated with the redistributed
OSPF route should be matched.
config route-map add match
591