Disable Dot1P Replacement Ports - Extreme Networks ExtremeWare Command Reference Manual

disable dot1p replacement ports

disable dot1p replacement ports [<portlist> | all]
Description
Disables the ability to overwrite 802.1p priority values for a given set of ports.
NOTE
This command is available only on the "i" series switches.
Syntax Description
portlist Specifies a list of ports or slots and ports to which the parameters apply. May be in the form 1, 2, 3-5,
2:5, 2:6-2:8.
all Specifies that 892.1p replacement should be disabled for all ports.
Default
N/A
Usage Guidelines
None
Example
The following command disables DiffServ replacement on all ports:
disable dot1p replacement ports all
History
This command was available in ExtremeWare 6.0.
Platform Availability
This command is available on the "i" series platforms only.
ExtremeWare 7.5 Command Reference Guide
disable dot1p replacement ports
449