Disable Diffserv Replacement Ports - Extreme Networks ExtremeWare Command Reference Manual

disable diffserv replacement ports

disable diffserv replacement ports [<portlist> | all]
Description
Disables the replacement of diffserv code points in packets transmitted by the switch.
NOTE
This command is available only on the "i" series switches.
Syntax Description
portlist Specifies a list of ports or slots and ports to which the parameters apply. May be in the form 1, 2, 3-5,
2:5, 2:6-2:8.
all Specifies that DiffServ replacement should be disabled for all ports.
Default
N/A
Usage Guidelines
None
Example
The following command disables DiffServ replacement on selected ports:
disable diffserv replacement ports 3,5,6
History
This command was available in ExtremeWare 6.0.
Platform Availability
This command is available on the "i" series platforms only.
ExtremeWare 7.5 Command Reference Guide
disable diffserv replacement ports
447