Configure Snmpv3 Delete Filter - Extreme Networks ExtremeWare Command Reference Manual

configure snmpv3 delete filter

configure snmpv3 delete filter [all | [{hex} <profile name> {subtree
<object identifier>}]]
Description
Delete a filter from a filter profile.
Syntax Description
all
hex
profile name
object identifier
Default
N/A.
Usage Guidelines
Use this command to delete a filter entry from the snmpNotifyFilterTable. Specify
entries. Specify a profile name to delete all entries for that profile name. Specify a profile name and a
subtree to delete just those entries for that filter profile and subtree.
Example
Use the following command to delete the filters from the filter profile prof1 that reference the MIB
subtree 1.3.6.1.4.1:
configure snmpv3 delete filter prof1 subtree 1.3.6.1.4.1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies all filters.
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the filter profile of the filter to delete.
Specifies the MIB subtree of the filter to delete.
configure snmpv3 delete filter
to remove all
all
145