Configure Snmpv3 Delete Filter - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Commands for Managing the Switch

configure snmpv3 delete filter

configure snmpv3 delete filter [all | [{hex <hex value>} <profile name>

{subtree <object identifier>}]]

Delete a filter from a filter profile.

Syntax Description

profile name

object identifier

Usage Guidelines

Use this command to delete a filter entry from the snmpNotifyFilterTable. Specify

entries. Specify a profile name to delete all entries for that profile name. Specify a profile name and a

subtree to delete just those entries for that filter profile and subtree.

Use the following command to delete the filters from the filter profile prof1 that reference the MIB

subtree 1.3.6.1.4.1:

configure snmpv3 delete filter prof1 subtree 1.3.6.1.4.1

This command was first available in ExtremeWare 7.1.0.

This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

Specifies all filters.

Specifies that the value to follow is to be supplied as a colon separated string

of hex octets.

Specifies the filter profile of the filter to delete.

Specifies the MIB subtree of the filter to delete.

to remove all

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5