Captive Portal Local User Commands - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Format
show captive-portal interface configuration [ <1-10>] status
Mode Privileged EXEC mode
Term Definition
CP ID The captive portal ID
CP Name The captive portal name
Interface The interface associated with the CP ID.
Interface The description of the interface
Description
Type The type of the interface
Example
(switch)#show captive-portal interface configuration status
CP ID CP Name
----- ------------
1 Default
(switch)
#show captive-portal interface configuration 1 status
CP ID..................................... 1
CP Name................................... cp1
Interface Interface Description
--------- --------------------------------- --------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit

Captive Portal Local User Commands

The following section describes captive portal local user commands.
user password
Use this command to create a local user or change the password for an existing user. The user-id is
user ID in the range of 1-128. The password is the user password in the range of 8-64 characters.
You can also enter encrypted password using the parameter encrypted.
Captive Portal Commands
Interface Interface Description
--------- ----------------------------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit
v1.0, November 2010
Type
Physical
Type
--------
Physical
9-24