NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 431

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no telnetcon timeout
This command sets the Telnet connection session timeout value to the default.
Note: Changing the timeout value for active sessions does not become effective until the
session is reaccessed. Also, any keystroke activates the new timeout duration.
Format
no telnetcon timeout
Mode Privileged EXEC
show telnet
This command displays the current outbound Telnet settings. In other words, these settings apply
to Telnet connections initiated from the switch to a remote system.
Format
show telnet
Modes • Privileged EXEC
• User EXEC
Term Definition
Outbound Telnet The number of minutes an outbound Telnet session is allowed to remain inactive before
Login Timeout
being logged off.
Maximum The number of simultaneous outbound Telnet connections allowed.
Number of
Outbound Telnet
Sessions
Allow New Indicates whether outbound Telnet sessions will be allowed.
Outbound Telnet
Sessions
Management Commands
v1.0, November 2010
7-15