NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 37

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
nsf
This command enables non-stop forwarding.
Default Enabled
Format
nsf
Mode Stack Global Config
no nsf
This command disables non-stop forwarding.
Format
no nsf
Mode Stack Global Config
show nsf
This command shows the status of non-stop forwarding.
Format
show nsf
Mode Privileged EXEC
Example:
(Switch)#show nsf
Administrative Status.......................... Enable
Operational Status............................. Enable
Last Startup Reason............................ Warm Auto-Restart
Time Since Last Restart........................ 0 days 16 hrs 52 mins 55 secs
Restart In Progress............................ No
Warm Restart Ready............................. Yes
Copy of Running Configuration to Backup Unit:
Status...................................... Stale
Time Since Last Copy........................ 0 days 4 hrs 53 mins 22 secs
Time Until Next Copy........................ 28 seconds
Unit NSF Support
---- -----------
1 Yes
2 Yes
3 Yes
Stacking Commands
v1.0, November 2010
2-13