NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 437

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
ip http server
This command enables access to the switch through the Web interface. When access is enabled,
the user can login to the switch from the Web interface. When access is disabled, the user cannot
login to the switch's Web server. Disabling the Web interface takes effect immediately. All
interfaces are affected.
Default enabled
Format
ip http server
Mode Privileged EXEC
no ip http server
This command disables access to the switch through the Web interface. When access is disabled,
the user cannot login to the switch's Web server.
Format
no ip http server
Mode Privileged EXEC
ip http secure-server
This command is used to enable the secure socket layer for secure HTTP.
Default disabled
Format
ip http secure-server
Mode Privileged EXEC
no ip http secure-server
This command is used to disable the secure socket layer for secure HTTP.
Format
no ip http secure-server
Mode Privileged EXEC
Management Commands
v1.0, November 2010
7-21