NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 555

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Format
show captive-portal user [ <1-128> ]
Mode Privileged EXEC mode
Term Definition
User ID The user ID
User Name The user name
Session Timeout Logout once session timeout is reached (seconds). If the value is 0 then use the value
configured for the captive portal.
Idle Timeout Logout once idle timeout is reached (seconds). If the attribute is 0 then use the value
configured for the captive portal.
Group ID The group ID associated with the user
Group Name The group name
If the user ID is specified, the following terms are displayed.
Term Definition
Password If the password is configured.
Configured
Max Bandwidth Up Maximum client transmit rate (b/s). Limits the bandwidth at which the client can send
(bytes/sec)
data into the network. If the value is 0 then use the value configured for the captive
portal.
Max Bandwidth Maximum client receive rate (b/s). Limits the bandwidth at which the client can receive
Down (bytes/sec)
data from the network. If the value is 0 or then use the value configured for the captive
portal.
Max Input Octets Maximum number of octets the user is allowed to transmit.After this limit has been
(bytes)
reached the user will be disconnected. If the value is 0 then use the value configured for
the captive portal.
Max Output Octets Maximum number of octets the user is allowed to receive. After this limit has been
(bytes)
reached the user will be disconnected. If the attribute is 0 then use the value configured
for the captive portal.
Max Total Octets Maximum number of octets the user is allowed to transfer (sum of octets transmitted
(bytes)
and received). After this limit has been reached the user will be disconnected. If the
value is 0 then use the value configured for the captive portal.
Example
(switch)#show captive-portal user
Captive Portal Commands
v1.0, November 2010
9-30