NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 195

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no set igmp querier version
Use this command to set the IGMP Querier version to its default value.
Format
no set igmp querier version
Mode Global Config
set igmp querier election participate
Use this command to enable the Snooping Querier to participate in the Querier Election process
when it discovers the presence of another Querier in the VLAN. When this mode is enabled, if the
Snooping Querier finds that the other Querier's source address is better (less) than the Snooping
Querier's address, it stops sending periodic queries. If the Snooping Querier wins the election,
then it will continue sending periodic queries.
Default disabled
Format
set igmp querier election participate
Mode VLAN Config
no set igmp querier election participate
Use this command to set the Snooping Querier not to participate in querier election but go into
non-querier mode as soon as it discovers the presence of another querier in the same VLAN.
Format
no set igmp querier election participate
Mode VLAN Config
show igmpsnooping querier
Use this command to display IGMP Snooping Querier information. Configured information is
displayed whether or not IGMP Snooping Querier is enabled.
Format
show igmpsnooping querier [{detail | vlan <vlanid>}]
Mode Privileged EXEC
Switching Commands
v1.0, November 2010
3-154