NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 58

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no spanning-tree tcnguard
This command disables the propagation of received topology change notifications and topology
changes to other ports.
Format
no spanning-tree tcnguard
Mode Global Config
spanning-tree max-age
This command sets the Bridge Max Age parameter to a new value for the common and internal
spanning tree. The max-age value is in seconds within a range of 6 to 40, with the value being less
than or equal to 2 x (Bridge Forward Delay - 1).
Default 20
Format
spanning-tree max-age <6-40>
Mode Global Config
no spanning-tree max-age
This command sets the Bridge Max Age parameter for the common and internal spanning tree to
the default value.
Format
no spanning-tree max-age
Mode Global Config
spanning-tree max-hops
This command sets the MSTP Max Hops parameter to a new value for the common and internal
spanning tree. The max-hops value is a range from 6 to 40.
Default 20
Format
spanning-tree max-hops <1-127>
Mode Global Config
Switching Commands
v1.0, November 2010
3-17