NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 228

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no dos-control l4port
This command disables L4 Port Denial of Service protections.
Format
no dos-control l4port
Mode Global Config
dos-control icmp
This command enables Maximum ICMP Packet Size Denial of Service protections. If the mode is
enabled, Denial of Service prevention is active for this type of attack. If ICMP Echo Request
(PING) packets ingress having a size greater than the configured value, the packets will be
dropped if the mode is enabled.
Default disabled <512>
Format
dos-control icmp [<0-1023>]
Mode Global Config
no dos-control icmp
This command disables Maximum ICMP Packet Size Denial of Service protections.
Format
no dos-control icmp
Mode Global Config
dos-control smacdmac
This command enables Source MAC address = Destination MAC address (SMAC=DMAC)
Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for this
type of attack. If packets ingress with SMAC=DMAC, the packets will be dropped if the mode is
enabled.
Default disabled
Format
dos-control smacdmac
Mode Global Config
Switching Commands
v1.0, November 2010
3-187