NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 92

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no voice vlan (Global Config)
Use this command to disable the Voice VLAN capability on the switch.
Format
no voice vlan
Mode Global Config
voice vlan (Interface Config)
Use this command to enable the Voice VLAN capability on the interface.
Default disabled
Format
voice vlan {<id> | dot1p <priority> | none | untagged}
Mode Interface Config
You can configure Voice VLAN in one of three different ways:
Parameter Description
dot1p Configure the IP phone to use 802.1p priority tagging for voice traffic and to use the
default native VLAN (VLAN 0) to carry all traffic. Valid <priority> range is 0 to 7.
none Allow the IP phone to use its own configuration to send untagged voice traffic.
untagged Configure the phone to send untagged voice traffic.
no voice vlan (Interface Config)
Use this command to disable the Voice VLAN capability on the interface.
Format
no voice vlan
Mode Interface Config
voice vlan data priority
Use this command to either trust or untrust the data traffic arriving on the Voice VLAN port.
Switching Commands
v1.0, November 2010
3-51