NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 166

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
ip dhcp snooping database write-delay
Use this command to configure the interval in seconds at which the DHCP Snooping database will
be persisted. The interval value ranges from 15 to 86400 seconds.
Default 300 seconds
Format
ip dhcp snooping database write-delay <in seconds>
Mode Global Config
no ip dhcp snooping database write-delay
Use this command to set the write delay value to the default value.
Format
no ip dhcp snooping database write-delay
Mode Global Config
ip dhcp snooping binding
Use this command to configure static DHCP Snooping binding.
Format
ip dhcp snooping binding <mac-address> vlan <vlan id> <ip address>
interface <interface id>
Mode Global Config
no ip dhcp snooping binding <mac-address>
Use this command to remove the DHCP static entry from the DHCP Snooping database.
Format
no ip dhcp snooping binding <mac-address>
Mode Global Config
ip verify binding
Use this command to configure static IP source guard (IPSG) entries.
Switching Commands
v1.0, November 2010
3-125