Show Mac Access-Lists - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Format
mac access-group <name> [vlan <vlan-id>] [in|out] [sequence <1-
4294967295>]
Modes • Global Config
• Interface Config
no mac access-group
This command removes a MAC ACL identified by <name> from the interface in a given
direction.
Format
no mac access-group <name> [vlan <vlan-id>] in
Modes • Global Config
• Interface Config

show mac access-lists

This command displays a MAC access list and all of the rules that are defined for the MAC ACL.
Use the [name] parameter to identify a specific MAC ACL to display.
Format
show mac access-lists [name]
Mode Privileged EXEC
Term Definition
Rule Number The ordered rule number identifier defined within the MAC ACL.
Action The action associated with each rule. The possible values are Permit or Deny.
Source MAC The source MAC address for this rule.
Address
Destination MAC The destination MAC address for this rule.
Address
Ethertype The Ethertype keyword or custom value for this rule.
VLAN ID The VLAN identifier value or range for this rule.
COS The COS (802.1p) value for this rule.
Log Displays when you enable logging for the rule.
Assign Queue The queue identifier to which packets matching this rule are assigned.
Mirror Interface The unit/slot/port to which packets matching this rule are copied.
Quality of Service (QoS) Commands
v1.0, November 2010
5-37