NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 331
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
show eventlog
This command displays the event log, which contains error messages from the system. The event
log is not cleared on a system reset. The <unit> is the switch identifier.
Format
show eventlog [<unit>]
Mode
Privileged EXEC
Term
Definition
File
The file in which the event originated.
Line
The line number of the event.
Task Id
The task ID of the event.
Code
The event code.
Time
The time this event occurred.
Unit
The unit for the event.
Note: Event log information is retained across a switch reset.
show hardware
This command displays inventory information for the switch.
Note: The show version command and the show hardware command display the same
information. In future releases of the software, the show hardware command will
not be available. For a description of the command output, see the command
version" on page
Format
show hardware
Mode
Privileged EXEC
Utility Commands
6-8.
v1.0, November 2010
"show
6-7
Advertisement
Table of Contents
