NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 491

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
tacacs-server timeout
Use the tacacs-server timeout command to set the timeout value for communication with
the TACACS+ servers. The <timeout> parameter has a range of 1-30 and is the timeout value
in seconds.
Default 5
Format
tacacs-server timeout <timeout>
Mode Global Config
no tacacs-server timeout
Use the no tacacs-server timeout command to restore the default timeout value for all
TACACS servers.
Format
no tacacs-server timeout
Mode Global Config
key
Use the key command in TACACS Configuration mode to specify the authentication and
encryption key for all TACACS communications between the device and the TACACS server.
This key must match the key used on the TACACS daemon. The <key-string> parameter
specifies the key name. For an empty string use " ". (Range: 0 - 128 characters).
Text-based configuration supports TACACS server's secrets in encrypted and non-encrypted
format. When you save the configuration, these secret keys are stored in encrypted format only. If
you want to enter the key in encrypted format, enter the key along with the encrypted keyword. In
the show running config command's display, these secret keys are displayed in encrypted format.
You cannot show these keys in plain text format.
Format
key [<key-string> | encrypted <key-string>]
Mode TACACS Config
Management Commands
v1.0, November 2010
7-75