Show Spanning-Tree Brief - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term Definition
Topology Number of times changed.
Change Count
Topology Boolean value of the Topology Change parameter for the switch indicating if a topology
Change
change is in progress on any port assigned to the common and internal spanning tree.
Designated The bridge identifier of the root bridge. It is made up from the bridge priority and the base
Root
MAC address of the bridge.
Root Path Cost Value of the Root Path Cost parameter for the common and internal spanning tree.
Root Port Identifier of the port to access the Designated Root for the CST
Identifier
Root Port Max Derived value.
Age
Root Port Derived value.
Bridge Forward
Delay
Hello Time Configured value of the parameter for the CST.
Bridge Hold Minimum time between transmission of Configuration Bridge Protocol Data Units
Time
(BPDUs).
Bridge Max Bridge max-hops count for the device.
Hops
CST Regional Bridge Identifier of the CST Regional Root. It is made up using the bridge priority and the
Root
base MAC address of the bridge.
Regional Root Path Cost to the CST Regional Root.
Path Cost
Associated List of forwarding database identifiers currently associated with this instance.
FIDs
Associated List of VLAN IDs currently associated with this instance.
VLANs

show spanning-tree brief

This command displays spanning tree settings for the bridge. The following information appears.
Format
show spanning-tree brief
Mode • Privileged EXEC
• User EXEC
Switching Commands
v1.0, November 2010
3-24