NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 110

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
controlled port mode to reflect the outcome of the authentication exchanges between the
supplicant, authenticator and the authentication server. If the
MAC-based dot1x authentication is enabled on the port.
Default auto
Format
dot1x port-control {force-unauthorized | force-authorized | auto |
mac-based}
Mode Interface Config
no dot1x port-control
This command sets the 802.1x port control mode on the specified port to the default value.
Format
no dot1x port-control
Mode Interface Config
dot1x port-control all
This command sets the authentication mode to use on all ports. Select force-unauthorized
to specify that the authenticator PAE unconditionally sets the controlled port to unauthorized.
Select force-authorized to specify that the authenticator PAE unconditionally sets the
controlled port to authorized. Select auto to specify that the authenticator PAE sets the controlled
port mode to reflect the outcome of the authentication exchanges between the supplicant,
authenticator and the authentication server. If the
based dot1x authentication is enabled on the port.
Default auto
Format
dot1x port-control all {force-unauthorized | force-authorized | auto
| mac-based}
Mode Global Config
no dot1x port-control all
This command sets the authentication mode on all ports to the default value.
Switching Commands
mac-based
v1.0, November 2010
option is specified, then
mac-based
option is specified, then MAC-
3-69