NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 443

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Format
ip http secure-port <portid>
Mode Privileged EXEC
no ip http secure-port
This command is used to reset the SSL port to the default value.
Format
no ip http secure-port
Mode Privileged EXEC
ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1,
SSL3 or to both TLS1 and SSL3.
Default SSL3 and TLS1
Format
ip http secure-protocol [SSL3] [TLS1]
Mode Privileged EXEC
show ip http
This command displays the http settings for the switch.
Format
show ip http
Mode Privileged EXEC
Term
HTTP Mode (Unsecure)
Java Mode
Maximum Allowable HTTP
Sessions
HTTP Session Hard Timeout
HTTP Session Soft Timeout
HTTP Mode (Secure)
Secure Port
Management Commands
Definition
The unsecure HTTP server administrative mode.
The java applet administrative mode which applies to both secure and un-
secure web connections.
The number of allowable un-secure http sessions.
The hard timeout for un-secure http sessions in hours.
The soft timeout for un-secure http sessions in minutes.
The secure HTTP server administrative mode.
The secure HTTP server port number.
v1.0, November 2010
7-27