Show Dot1X Clients - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term Definition
EAP Response/ The number of EAP response/identity frames that have been received by this
Id Frames
authenticator.
Received
EAP Response The number of valid EAP response frames (other than resp/id frames) that have been
Frames
received by this authenticator.
Received
EAP Request/Id The number of EAP request/identity frames that have been transmitted by this
Frames
authenticator.
Transmitted
EAP Request The number of EAP request frames (other than request/identity frames) that have been
Frames
transmitted by this authenticator.
Transmitted
Invalid EAPOL The number of EAPOL frames that have been received by this authenticator in which the
Frames
frame type is not recognized.
Received
EAP Length The number of EAPOL frames that have been received by this authenticator in which the
Error Frames
frame type is not recognized.
Received

show dot1x clients

This command displays 802.1x client information.This command also displays information about
the number of clients that are authenticated using Monitor mode and using 802.1X.
Format
show dot1x clients {<unit/slot/port> | all}
Mode Privileged EXEC
Term Definition
Clients Indicates the number of the Dot1x clients authenticated using Monitor mode.
Authenticated
using Monitor
Mode
Clients Indicates the number of Dot1x clients authenticated using 802.1x authentication process.
Authenticated
using Dot1x
Logical The logical port number associated with a client.
Interface
Switching Commands
v1.0, November 2010
3-80