NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 297

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no class
This command deletes the instance of a particular class and its defined treatment from the
specified policy. <classname> is the names of an existing DiffServ class.
Note: This command removes the reference to the class definition for the specified policy.
Format
no class <classname>
Mode Policy-Map Config
mark cos
This command marks all packets for the associated traffic stream with the specified class of
service value in the priority field of the 802.1p header (the only tag in a single tagged packet or the
first or outer 802.1Q tag of a double VLAN tagged packet). If the packet does not already contain
this header, one is inserted. The CoS value is an integer from 0 to 7.mark ip-dscp
Default 1
Format
mark-cos <0-7>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark IP DSCP, IP Precedence, Police
mark ip-dscp
This command marks all packets for the associated traffic stream with the specified IP DSCP
value.
The <dscpval> value is specified as either an integer from 0 to 63, or symbolically through one
of the following keywords: af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be,
cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.
Format
mark ip-dscp <dscpval>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark CoS, Mark IP Precedence, Police
Quality of Service (QoS) Commands
v1.0, November 2010
5-23