NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 333
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
The display parameters, when the argument is <unit/slot/port>, are as follows:
Parameters
Definition
Packets
The total number of packets (including broadcast packets and multicast packets) received
Received
by the processor.
Without Error
Packets
The number of inbound packets that contained errors preventing them from being
Received With
deliverable to a higher-layer protocol.
Error
Broadcast
The total number of packets received that were directed to the broadcast address. Note
Packets
that this does not include multicast packets.
Received
Packets
The total number of packets transmitted out of the interface.
Transmitted
Without Error
Transmit
The number of outbound packets that could not be transmitted because of errors.
Packets Errors
Collisions
The best estimate of the total number of collisions on this Ethernet segment.
Frames
Time Since
The elapsed time, in days, hours, minutes, and seconds since the statistics for this port
Counters Last
were last cleared.
Cleared
The display parameters, when the argument is "switchport" are as follows:
Term
Definition
Packets
The total number of packets (including broadcast packets and multicast packets) received
Received
by the processor.
Without Error
Broadcast
The total number of packets received that were directed to the broadcast address. Note
Packets
that this does not include multicast packets.
Received
Packets
The number of inbound packets that contained errors preventing them from being
Received With
deliverable to a higher-layer protocol.
Error
Packets
The total number of packets transmitted out of the interface.
Transmitted
Without Error
Broadcast
The total number of packets that higher-level protocols requested to be transmitted to the
Packets
Broadcast address, including those that were discarded or not sent.
Transmitted
Transmit Packet
The number of outbound packets that could not be transmitted because of errors.
Errors
Utility Commands
v1.0, November 2010
6-9
Advertisement
Table of Contents
