Show Datacenter-Bridging Priority-Flow-Control - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
VLAN tagging must be enabled to carry the 802.1p value through the network. The number of
lossless priorities supported on XSM7224S is 2.
Additionally, the mapping of class-of-service levels to 802.1p priority values to must be set to one-
to-one.
Format
datacenter-bridging priority-flow-control priority priority-list
{drop | no-drop}
Mode Interface Config
Default drop

show datacenter-bridging priority-flow-control

This command displays a summary of the priority flow control configuration for a specified
interface or all interfaces.
Format
show datacenter-bridging priority-flow-control [interface <unit/
slot/port>]
Mode Privileged EXEC
(Switch) #show datacenter-bridging priority-flow-control
Port Drop No-Drop State Priorities Priorities
---- ---- ------ -------- -------
1/0/1 1-4,7 5,6 Enabled
1/0/2 1-4,6-7 5 Enabled
....
1/0/48 1-4,7 5,6 Enabled
Switching Commands
v1.0, November 2010
3-205