NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 179

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no arp access-list
Use this command to delete a configured ARP ACL.
Format
no arp access-list acl-name
Mode Global Config
permit ip host mac host
Use this command to configure a rule for a valid IP address and MAC address combination used in
ARP packet validation.
Format
permit ip host sender-ip mac host sender-mac
Mode ARP Access-list Config
no permit ip host mac host
Use this command to delete a rule for a valid IP and MAC combination.
Format
no permit ip host sender-ip mac host sender-mac
Mode ARP Access-list Config
show ip arp inspection
Use this command to display the Dynamic ARP Inspection global configuration and configuration
on all the VLANs. With the vlan-list argument (i.e. comma separated VLAN ranges), the
command displays the global configuration and configuration on all the VLANs in the given
VLAN list. The global configuration includes the source mac validation, destination mac
validation and invalid IP validation information.
Format
show ip arp inspection [vlan <vlan-list>]
Mode • Privileged EXEC
• User EXEC
Switching Commands
v1.0, November 2010
3-138