NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 138
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
lacp collector max-delay
Use this command to configure the port-channel collector max delay. The valid range of <delay>
is 0-65535.
Default
0x8000
Format
lacp collector max-delay <delay>
Mode
Interface Config
Note: This command is only applicable to port-channel interfaces.
no lacp collector max delay
Use this command to configure the default port-channel collector max delay.
Format
no lacp collector max-delay
Mode
Interface Config
lacp actor admin
Use this command to configure the LACP actor admin parameters.
lacp actor admin key
Use this command to configure the administrative value of the LACP actor admin key. The valid
range for <key> is 0-65535.
Default
Internal Interface Number of this Physical Port
Format
lacp actor admin key <key>
Mode
Interface Config
Switching Commands
v1.0, November 2010
3-97
Advertisement
Table of Contents
