NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 374

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
ip dhcp conflict logging
This command enables conflict logging on DHCP server.
Default enabled
Format
ip dhcp conflict logging
Mode Global Config
no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
Format
no ip dhcp conflict logging
Mode Global Config
clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database. If "*" is
specified, the bindings corresponding to all the addresses are deleted. <address> is a valid IP
address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Format
clear ip dhcp binding {<address> | *}
Mode Privileged EXEC
clear ip dhcp server statistics
This command clears DHCP server statistics counters.
Format
clear ip dhcp server statistics
Mode Privileged EXEC
Utility Commands
v1.0, November 2010
6-50