NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 533

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
group
Use this command to configure a group ID for this captive portal configuration. If a group number
is configured, the user entry (Local or RADIUS) must be configured with the same name and the
group to authenticate to this captive portal instance. The group ID must be xist first. You can use
the command "user group <1-10>" to create a group ID. The default group ID is 1 for a captive
portal configuration.
Default 1
Format
group <1-10>
Mode Captive Portal Instance mode
no group
Use this command to reset the group number to the default.
Default 1
Format
no group <1-10>
Mode Captive Portal Instance mode
redirect (Captive Portal)
Use this command to enable the redirect mode for a captive portal configuration. Use the "no"
form of this command to disable redirect mode.
Default disable
Format
redirect
Mode Captive Portal Instance mode
no redirect
Use this command to disable redirect mode.
Captive Portal Commands
v1.0, November 2010
9-8